[[wiki-architecture]] · [[Building Materials]] · [[ARCHITECTURE]] · [[000]] # Cast-in-place concrete Cast-in-place concrete or cast-in-situ concrete is a technology of construction of buildings where walls and slabs of the buildings are cast at the site in formwork. This differs from precast concrete technology where slabs are cast elsewhere and then brought to the construction site and assembled. It uses concrete slabs for walls instead of bricks or wooden panels, and formwork is used for both walls and roof. Advantages of this technology are strength of the building, insulation, and versatility for different types of buildings. A disadvantage is the high amount of labor required to install and remove formwork. == See also == Precast concrete Formwork == References == - [[Professional Practice/Codes & Standards/National Building Code of India/Part 06 - Structural Design/Section 5A - Plain and Reinforced Concrete]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 06 - Structural Design/Section 5B - Prestressed Concrete]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 06 - Structural Design/Section 7A - Prefabricated Concrete]] - [[Building Construction/Construction & Materials/Building Material/Concrete and Cement]] - [[Building Construction/Structural Systems/Concrete Structures]] - [[Building Construction/Construction & Materials/Building Material/Insulation Materials]] - [[Environmental Design/Strong Foundations for Sustainable Constructions/pillars]] - [[Building Construction/Specifications and Detailing]] - [[Urban and Planning/Urban Design]] - [[Design/Building Typologies/Healthcare Architecture]]