[[wiki-architecture]] · [[Building Materials]] · [[ARCHITECTURE]] · [[000]] # Riser clamp A riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe, and integral fasteners are then tightened to clamp them onto the pipe. The friction between the pipe and riser clamp transfers the weight of the pipe through the riser clamp to the building structure. Risers are generally located at floor penetrations, particularly for continuous floor slabs such as concrete. They may also be located at some other interval as dictated by local building codes or at intermediate intervals to support plumbing which has been altered or repaired. Heavier piping types, such as cast iron, require more frequent support. Ordinarily, riser clamps are made of carbon steel and individually sized to fit certain pipe sizes. There are at least two types of riser clamp: the two-bolt pipe clamp and the yoke clamp. == References == - [[Professional Practice/Codes & Standards/National Building Code of India/Part 06 - Structural Design]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 03 - Development Control Rules]] - [[Environmental Design/Passive Design Strategies]] - [[Interior Architecture/Renovation and Conservation]] - [[Design/Architectural Design/Architectural Styles and Movements]] - [[Wiki-Architecture/Buildings and Structures]] - [[Professional Practice/Construction Management/Project Planning]] - [[History and Theory/Temple Architecture]] - [[Environmental Design/Daylighting Design]] - [[History and Theory/World History/Contemporary Architecture]]