[[wiki-architecture]] · [[Building Materials]] · [[ARCHITECTURE]] · [[000]] # SAE 310S stainless steel SAE 310S stainless steel is the low carbon version of 310 and is suggested for applications where sensitisation, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem. == Overview == SAE 310 stainless steel is a highly alloyed austenitic stainless steel used for high temperature application. The high chromium and nickel content give the steel excellent oxidation resistance as well as high strength at high temperature. This grade is also very ductile, and has good weldability enabling its widespread usage in many applications. 310/310S find wide application in all high-temperature environments where scaling and corrosion resistance, as well as high temperature strength and good creep resistance are required. == Chemical composition == == See also == 17-4 stainless steel Martensitic stainless steel == External links == Stainless Steel Coil == References == - [[Professional Practice/Codes & Standards/National Building Code of India/Part 06 - Structural Design/Section 6 - Steel]] - [[Building Construction/Structural Systems/Steel Structures]] - [[Urban and Planning/Master Planning]] - [[Design/Architectural Design]] - [[Wiki-Architecture/Elements and Typologies]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 03 - Development Control Rules]] - [[Professional Practice/Codes & Standards/International Building Codes]] - [[Design/Art and Culture]] - [[Research, Analysis & Citations]] - [[Environmental Design/Green Building Rating Systems]]