[[wiki-architecture]] · [[Building Materials]] · [[ARCHITECTURE]] · [[000]] # Undercut (manufacturing) In manufacturing, an undercut is a special type of recessed surface that is inaccessible using a straight tool. In turning, it refers to a recess in a diameter generally on the inside diameter of the part. In milling, it refers to a feature which is not visible when the part is viewed from the spindle. In molding, it refers to a feature that cannot be molded using only a single pull mold. In printed circuit board construction, it refers to the portion of the copper that is etched away under the photoresist. == Turning == On turned parts an undercut is also known as a neck or "relief groove". They are often used at the end of the threaded portion of a shaft or screw to provide clearance for the cutting tool. == Molding == Undercut - Any indentation or protrusion in a shape that will prevent its withdrawal from a one-piece mold. == Milling == In milling the spindle is where a cutting tool is mounted. In some situations material must be cut from a direction where the feature can not be seen from the perspective of the spindle and requires special tooling to reach behind the visible material. The corners may be undercut to remove the radius that is usually left by the milling cutter this is commonly referred to as a relief. == Etching == Undercuts from etching (microfabrication) are a side effect, not an intentional feature. == Gears == == References == - [[Building Construction/Specifications and Detailing/Construction Specifications]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 08 - Building Services]] - [[Professional Practice/Construction Management/Quality Control]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 08 - Building Services/Section 6 - ICT Installations]] - [[Interior Architecture/Renovation and Conservation]] - [[History and Theory/World History/Modern Architecture]] - [[Professional Practice/Codes & Standards/National Building Code of India/Part 00 - Integrated Approach]] - [[Building Construction/Hill Architecture]] - [[Building Construction/Specifications and Detailing]] - [[Building Services/Electrical Systems]] === Bibliography === Degarmo, E. Paul; Black, J T.; Kohser, Ronald A. (2003), Materials and Processes in Manufacturing (9th ed.), Wiley, ISBN 0-471-65653-4.